Nexprint Logo
Beta
3D ModelsWorkshopEvents
Upload

  • fidget

  • vortex

  • passthrough

  • fidget cube

  • cube fidget

  • impossible passthrough

  • fidget vortex

  • master printer

  • passthrough fidget

  • vortex passthrough

  • passthrough vortex

  • impossible cube passthrough

  • cube passthrough

  • best passthrough

  • cube vortex

  • dual inner

  • two inner styles

  • contrasting color fidget

  • desktop fidget

  • print in place

The BEST Passthrough Cube
Print Profile(1)
  • The BEST Passthrough Cube Profile

    3-disc

    PLA

    Designer

    5(1)

6

5

157

45

Released 2025-11-02
Details
Files(1)
Makes & Comments (0)

About this model

This cube passthrough is the dual-inner one in my passthrough series. It comes with two distinct inner styles: one with a flat edge that fits smoothly with the outer shell, and one with visible outer rings for a classic vortex look.

The benefit is choice. You can pick the look you like, and combining colors from opposite ends of the color spectrum really brings the geometry to life.

The trade-off is fit between the inner and outer pieces. If it is tight, reprint the inner piece with the compensation below, since that is what I use to tighten tolerances and get a smoother assembly.

Print settings

  • Filament: PLA
  • Infill: 0% to 10%
  • Layer height: 0.2 mm recommended
  • Perimeters: 2
  • Top and bottom layers: 4
  • Print speed: 50 to 60 mm/s
  • Cooling: 100% fan after initial layers
  • Supports: none
  • Brim: none

Inner piece fit: For the inner piece only, I set XY Size Compensation to -0.35 mm to tighten tolerances and get a smoother assembly. I use this setting only because this model has separate inner passthrough pieces, and it replaces the older -0.5 mm value.

Tips

  • Check the fit: If it is tight, reprint the inner piece with XY Size Compensation of -0.35 mm.
  • Try both inner styles: This model comes with two distinct inner styles, so you can pick the look you like.

My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.

You may also like

The BEST Impossible Vortex Passthrough

Pointless Passthrough Octagonal Vortex

4D Octagonal Pointless Passthrough (The BEST Series)

The BEST (Circle) Impossible Passthrough

The BEST (Square Pyramid) Impossible Passthrough

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Standard Digital File License

This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.

Models(1)

  • model file image
    All Pieces Two Plates.3mfDesigner

    3.17 MB

    2025-11-01