multicolor
multimaterial
canvas
ptfe tube
Centauri Carbon 2
ptfe adapter
0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer
587
80
This is a quick CANVAS PTFE tube coupler that I designed to keep the connection between my dryer and the CANAVAS unit more secure for loading and unloading, as well as extended humidity control all the way to the printer with no air gaps. Included an Elegoo logo, of course and the part is Square to interface with the CANVAS housing so it won't rotate or move.
You may need to print 1% larger or smaller based on your filament type, tolerances, seam position and PTFE tube selection - this is designed to fit well on the CANVAS side as well as with standard PTFE diameter when printed in PLA at 100%.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
No Copyright.
Models(2)
CANVAS PTFE Coupler.stl.stlDesigner
642.17 KB
2026-02-07
- CANVAS PTFE Coupler.stl.3mf
935.31 KB
2026-02-10
