planter
indoor planter
- 0.24mm layer, 2 walls, 8% infill
1-disc
PLA
Designer
132
50
🎯 Recommended Print Settings
For best results, print this design with a 0.4mm nozzle at 0.24mm layer height for a great balance of speed and detail. Use 8-15% infill for a solid, lightweight print that won’t use too much material.
Note for Printing:
Tree supports are enabled and only needed for the bottom part of the planter.
If you’re using Orca Slicer, enable “Make Overhang Printable” (Quality > Overhangs) to avoid supports completely.
Bambu Studio doesn’t have this feature yet, so supports may still be required there.
You can scale the model to your preferred size.
⚡ Speed vs. Quality Trade-off
The model is optimized for a 0.4mm nozzle, but I’ve also had success with a 0.6mm nozzle if you’re looking to speed things up. The larger nozzle won’t affect the strength, and the prints still look awesome
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
- Indoor Planter Pot.3mfDesigner
11.91 MB
2026-01-26
