Yoshi Mario and Yoshi
Yoshi
Pixel Art
multicolor
filamentchange
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
3
0
Yoshi 01, 3 filament changes (at-layer-change)
NES - Yoshi Mario and Yoshi - Title Screen - Yoshi 01, 3 filament changes
With 3 filament changes for a total of 4 different colors
This print must to be slice with "Initial Layer Height" and "Layer Height" ~= 0.20 mm (unless there is a change in scale)
Except change of scale and/or layer height befor slicing.
You need to add 3 "filament change" (g-code "M600") or "pause" (g-code "M0") depending on your printer/firmware to change filament.
A change of filament every two layers.
Start with : White filament until Z0.40
Switch to : Salmon filament until Z0.80
Switch to : LawnGreen filament until Z1.20
Switch to : Black filament until Z1.60, the end of the print.
Credits :
- "Pixel Art Image" extracted from image found on "https://www.spriters-resource.com/nes/yoshimarioyoshi/sheet/12280/"
Happy printing.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
- ES1516_ECC2_SilkPLA_0.20mm_Title Screen - Yoshi 01.3mfDesigner
136.61 KB
2026-07-22
