FLOMES is a series of house-shaped covers to keep flowers beautiful and healthy thanks to the possibility of inserting a glass with water inside.

They have a hole in the roof so you can easily pour water into the glass to ensure that the flowers are always in good condition. These little houses are designed to be able to insert the flowers through the chimney and create a unique aesthetic effect.

To suit all, FLOMES can accommodate glasses of different sizes depending on the model:

• V1: up to 45 mm diameter and 105 mm height.

• V2: up to 37.5 mm in diameter and 125 mm in height

• V3: up to 40 mm in diameter and 85 mm in height

Although the narrower the vessel the more it will fit in height. The model is scalable to larger size, as if made smaller the walls would be too thin.

For commercial use: https://www.cubee3d.com/designers/creaserra?code=Q3LE76j59zaB

3D printing settings

For printing, keep in mind to cover the whole wall with wall lines, so using at least 4 wall lines will be enough. I used a layer height of 0.16 mm and matte PLA for a better finish.