Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Ooze Arcanist – Slime Mage of Living Magic

This striking female Ooze Mage statue represents a powerful spellcaster formed from living slime, inspired by RPG and Dungeons & Dragons fantasy worlds. The character stands in a commanding stance, conjuring magical ooze energy in both hands, as fluid tendrils rise and twist like living spells under her control.

The sculpt combines arcane mage elements with organic slime anatomy, featuring flowing magical ooze, smooth armor pieces, layered cloth, and dynamic motion in the arms and spell effects. The semi-liquid forms create a sense of constant movement, as if the mage is shaping her own body into pure magic. Fine facial details and confident posture reinforce her role as a master of arcane power.

With a height of approximately 110 mm, this model is designed as a large decorative fantasy statue, perfect for desks, tables, shelves, or display cabinets. Due to the complex spell shapes, overhangs, and fluid geometry, supports are required during FDM printing to preserve sharp details and ensure reliable results.

An excellent choice for fantasy collectors, painters, and tabletop RPG fans looking for a visually dynamic spellcaster that stands out as a centerpiece rather than a standard miniature.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support