Hueforge of Charizard surrounded in a firestorm.

Profiles are made for 100mmx100mm and 200mmx200mm using the AMS for colour swaps at the appropriate layer heights.

If printing without an AMS pauses will have to be added at the appropriate layer heights to switch colors.

Resizing:

Can be resized as you wish as long as the Z axis height stays the same at 2.08mm

Printing Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Actual Thickness is 2.08mm

Colors Used:
    PLA BambuLab Basic Black - Transmission Distance: 0.6
    PLA BambuLab Basic Red - Transmission Distance: 4
    PLA BambuLab Basic Orange - Transmission Distance: 5.0

       - PLA Bambu Basic Pumpkin Orange - Transmission Distance: 5.5 will work as good or better
    PLA Elegoo White - Transmission Distance: 8.9

        - PLA Bambu Basic Jade White - Transmission Distance: 5.0 will work as good or better

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to Orange
    At layer #20 (1.68mm) swap to White for the rest.