toy
play
kids
children
construction
traffic
cone
room
site
constructionsite
25x 1:24 - 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
25x 1:18 - 0.2mm layer, 2 walls, 15% infill1-disc
PLA
Designer
1x 1:18 - 0.2mm layer, 2 walls, 15% infill1-disc
PLA
Designer- 1x 1:24 - 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
87
26
Summary
Get more than two dozens multicolor traffic cones in one print - or print them single.
They also fit the 1:24 car models I have published.
Sizes
1:18 = 30.5mm height
1:24 = 22.8mm height
Print in 0.2mm layer height.
No supports needed.
Single color & multicolor
The cones are available in a 3MF file for a one-color print.
There are 3MF-files with predefined colors intended for users of AMS or MMU.
Manual filament change
1:24 filament changes
every 4,5mm, so at 4,5mm - 9mm - 13,5mm - 18mm
every 23 layers (@0.2mm layer height), so at 23 - 46 - 69 (hehehe) - 92
1:18 filament changes
every 6mm, so at 6mm - 12mm - 18mm - 24mm
every 30 layers (@0.2mm layer height), so at 30 - 60 - 90 - 120
Do you like my work? I would be very happy if you would support my work on Ko-fi.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(4)
- 25x traffic cone 1-24 multicolor FINAL.3mfDesigner
1008.38 KB
2025-12-01
- 25x traffic cone 1-18 multicolor FINAL V2.3mfDesigner
1012.88 KB
2025-12-01
- traffic cone 1-18 multicolor FINAL.3mfDesigner
128.95 KB
2025-12-01
- traffic cone 1-24 multicolor FINAL.3mfDesigner
128.97 KB
2025-12-01
View all(4)
