If you frequently use a multimeter, you’ve no doubt encountered situations where you need to hold or steady the component being measured with one hand while simultaneously gripping the test leads with the other to take readings at both ends.

        This multimeter probe tweezer is the perfect solution to that problem—its measurement width can be freely adjusted between 3 cm and 0 cm, and it offers convenient, one-handed operation that’s quick and easy to master. Available in 10 mm and 8 mm versions, it covers virtually all standard probes currently sold on the market.

        We recommend printing with PETG; PLA can also be used, but its elasticity degrades rapidly after prolonged clamping, making it prone to breakage.

        Regarding print settings, since I’m using this for personal projects and not in a rush, I opted for a layer height of 0.12 mm. The resulting surface finish is excellent, and the print takes approximately 50 minutes. If you prioritize speed, you can choose a layer height of 0.2 mm, which reduces the print time to around 30 minutes.