📝 Product Description — 12-Can Soda Dispenser (Slide-Fit, No Glue Needed)

Keep your drinks neatly organized and easy to grab with this fully 3D-printable Soda Can Dispenser, designed to hold 12 standard cans (up to 135 mm long × 52 mm diameter). The dispenser uses a smooth gravity-feed path, allowing each can to roll forward automatically when the one below is removed—perfect for fridges, shelves, garages, or workstations.

All parts use simple slide-together joints, engineered with clean tolerances so the entire structure assembles securely with no glue required. The cylindrical guide rails may be lightly glued if you want to prevent separation during frequent moving, but the core design is fully functional as a press-fit system. The model can be printed within a 250 × 250 × 250 mm build volume by rotating the large frame diagonally.

The dispenser loads from the top, allowing you to stack cans one by one. Once filled, simply pull a can from the bottom front opening, and the next one rolls forward smoothly. Designed for reliability and ease of printing, it performs well in PLA, PETG, ASA, or ABS.

✅ Features

• Holds 12 cans (135 mm × 52 mm each)
• Gravity-fed rolling mechanism—next can advances automatically
• Slide-fit joints throughout—no glue required
• Optional light gluing for the cylindrical rail pieces
• Large frame fits 250×250×250 mm printers when rotated diagonally
• Entire system prints face-down for optimal strength and finish
• Strong, functional build suitable for kitchen, garage, or workshop use
• Works with PLA, PETG, ASA, or ABS
•  

🖨️ Printing Recommendations

• Material: PLA, PETG, ASA, or ABS
• Layer Height: 0.2 mm
• Walls: 4 perimeters
• Infill: 15–30%
• Supports: Not required
• Orientation:
  • All parts print face down
  • Large frame may need diagonal rotation to fit 250×250×250 mm beds
• Notes:
  • Designed for clean tolerances and slide-fit assembly
  • Cylinders can be glued if extra rigidity is preferred