Puzzle Wall art - composed of multiple parts. Creates a 3D effect. You can combine colors according to your imagination.

Notice - each filament and printer has different characteristics. The connecting pins may not pass through smoothly to the holes. So additionally adjust the holes with something sharp. It really only takes a very little sanding. If the assembly does not hold well, use glue.

You can easily scale the print file = only modify the X and Y dimensions. But do not adjust the height (Z) in your slicer! 

In the print profile and .stl source is 2x the last 4 part. Adjusted by placing the pins, depending on how you decide to have the image orientation. (Print model's placement is mirrored to give the model a better surface = face down for PEI plates). 

If you want the model orientation on the right side of the door, rotate parts 1-3 for 180° before printing on the bed and then chose the correct version of the last - 4 part.

Assembly is simple: 

1) First, test all parts to see if the pins from the last part fit freely into the holes in the other parts. 

2) If you want to use a nail to attach it to the wall, place the first "full" part on the wall first. 

3) Then gradually connect the remaining 3 parts together through the pins/holes. 

4) Place them in the holes in the base part that is already on the wall.