super mushroom
mario
Pixel Art
Filament change
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
2
2
Super Mushroom, with 3 filament changes
Inspired by “Pixel Art”.
With 3 filament changes for a total of 4 different colors
This print must to be slice with "Initial Layer Height" and "Layer Height" = 0.20 mm (unless there is a change in scale)
Except change of scale and/or layer height befor slicing.
You need to add 3 "filament change" (g-code "M600") or "pause" (g-code "M0") depending on your printer/firmware to change filament.
A change of filament every two layers.
Start with : White filament until Z0.40
Switch to : NavajoWhite (or Pink) filament until Z0.80
Switch to : Red filament until Z1.20
Switch to : Black filament until Z1.60, the end of the print.
Filaments used "PLA+ blanc ArianePlast", "PLA Skin Velleman", "PLA Red Velleman", "PLA Recyclé ArianePlast".
Credits :
- "Pixel Art Image" extracted from image found on "https://www.anyrgb.com/en-clipart-pqntu"
Happy printing.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
- ES1182_PLA_0.20mm_super-mushroom-mario.3mfDesigner
38.81 KB
2025-09-02
super-mushroom-mario.stlDesigner122.93 KB
2025-09-02
