A durable, shock-absorbing TPU bumper designed to protect your Setpower PG216Wh Portable Power Station from drops and impacts. The design maintains full port access and does not interfere with the magnetic base, so you can still attach it securely to your SetPower cooler.

The Setpower PG216Wh is a great companion for camping, outdoor adventures, and powering a 12V fridge, but its weight makes it vulnerable to damage if dropped. This bumper provides a layer of flexible shock protection without compromising usability.

✨ Key Features

• Drop Protection: Flexible TPU absorbs impacts, reducing the risk of damage from drops.
• Magnetic Base Compatible: The bottom is fully open, so the built-in magnet still works with your SetPower cooler or any metal surface.
• Full Port Access: Precise cutouts for all ports, power button, display, and carrying handle.
• Personalization Ready: Flat side panels allow you to emboss your name, phone number, or logo in your slicer. Perfect for custom branding or recovery if lost.

🖨️ Printing Instructions

• Material: TPU (95A shore hardness recommended)
• Nozzle Size: 0.4mm
• Layer Height: 0.2mm
• Line Width: 0.42mm
• Infill: 15% (Gyroid, Cubic, or Rectilinear all work well)
• Supports: Required
  • Recommended: Tree/Organic supports (easier removal, cleaner finish)
  • Standard supports work with careful removal
• Speed Tips: Print slowly and ensure TPU is dry (use a filament dryer if possible).

🛠️ Assembly

1. Remove all support material carefully after printing.
2. Fit the bumper over one end of the power station.
3. Stretch the bumper gently over the opposite end until it snaps securely into place.

📌 Notes

• Designed for a snug fit — TPU flex makes installation possible.
• Works best in rugged environments: camping, van life, boating, or construction sites.
• Please share a make if you print one! Feedback and remixes are welcome.