Upload

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:    Start with Black    At layer #5 (0.48mm) swap to Gray    At layer #7 (0.64mm) swap to White for the rest.

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Credit must be given to the creator

Models(1)

  • model file image
    3D-Cube_Front_200x200.stlDesigner

    95.94 MB

    2025-08-10

No more