I've got it printing but it's not done yet! The electronics are all still bolted to the original bottom board, and I'm working on a new enclosure for that.

PRINTED PARTS:

• stop-holder.stl X1
• y-axle.stl X4
• y-bracket.stl X2
• y-bracket.stl (MIRRORED on Y-axis!!) X2
• y-motor-mount.stl X1
• y-stop-mount.stl X1
• z-motor-mount.stl X1
• z-rail.stl X4
• z-stop-clip v1.stl X1

EXTRUSIONS:

• 4 x 2020 Aluminium Extrusion - Natural Anodized 440mm
• 4 x 2020 Aluminium Extrusion - Natural Anodized 303mm
• 4 x 2020 Aluminium Extrusion - Natural Anodized 350mm

ADDITIONAL HARDWARE:

• 28 x Cast - 90 Degree Corner Bracket
• 56 x Button Head Screws M5 (Length: 8mm)
• 28 x Button Head Screws M5 (Length: 10mm)
• 4 x 1/4"-20 x 1/2" set screws

PLEXIGLASS SIDES (Haven't actually mounted or even received it yet but here's what I ordered):

• 2 x 12.5"x13"x1/8" clear acrylic sheet
• 2 x 12.5"x18"x1/8 clear acrylic sheet

AND FINALLY:

• 1 x FlashForge Creator (Wood frame edition)