My Uni-T universal cooling shroud for most printers that take a MK8 style hotend like the Ender, CR10, Aquila, Sunlu/Jayo, and many more!

Print the Uni-T shroud

Pick your hotend size (MK8 is the same as the Microswiss/clones and the most common size, S8 is specific to the very long hotend it comes with)

Pick your fan size (Stock fans are normally 4010)

Use those numbers to print your duct (MK8 hotend, 4020 fan? Print the MK8 4020 Duct)

ABL mount is universal to the BLtouch, 3DTouch, and CRtouch.
ABL Offsets: x30, y0, z-2
EZABL Offsets: x31.5, y0, z-2
Scale ABL spacer Z axis in slicer to get the appropriate size for your needs.

Requires screws that are at least 3mm longer than stock and I'd recommend using washers.
Also requires a total of 5 M3x6mm screws to bolt the ducting and the ABL mount on.

If you find my parts helpful, please consider donating to continue my research and progress in my projects.
Paypal: [email protected]
Venmo: @Maikumizu
Cashapp: $Maikumizu
Patreon:
https://www.patreon.com/KiNG3D