This is marked as a WIP only because I want to eventually slice it up to work with smaller printers, right now I have an all nighter put into this and have to take a break.

This is so far my hardest one to overcome, as far as going back into blender and redoing portions of the model to be able to be printed, but I really, REALLY wanted a Dialga so I stuck with it.

Sad part is this is about as small as it gets. The back piece is just too thin to print smaller and if I thicken it anymore it will get ride of some of the detail.

Some may rather loose the detail and print smaller. I guess just let me know and I may work on another for those individuals.

Besides Darkrai this is one of my favorite Pokemon. So I am eager to print this and really eager to see other people print theirs.

Good Luck and happy printing!

EDIT:
Sep-9-18
-Sliced the model into smaller segments, added alignment pins.
Pins are made with a 0.1mm tolerance, if there is an issue, the alignment holes are 7mmX10mmX11mm Elliptical Cylinders, if you wish to make your own.

Still keeping this a WIP until I get the opportunity to print the model. The printer I was going to use is in the process of getting it's hot-end replaced, so I'll get to it as soon as that is done.

Sep-18-18

• Added Picture of printed model
• Adjusted the size of the pins to 9.55mmX6.66mmX9.05mm
• Thickened the accents on the head for easier printing
• No Longer a WIP

Legal

I do not claim ownership of the original model and belongs to The Pokémon Company.

These are just me changing the models in order to be 3D print friendly.