This is a heart shaped keyring with a paw print inside.

I've printed around 500 of these on my CR 6-SE, attaching metal keyrings to the top. They were mostly printed in 4x4 sheets to print 16 at a time. Works with or without the brim, having a continuous one just makes removing the parts way easier on a glass bed.

Best suited for nozzles 0.4mm or smaller, any larger and the detail is lost in the paw.

Use more than one wall. I recommend printing them solid, setting top/bottom layer counts to 5 respectively.

If you do opt for infill, make sure it is above 35% as bridging makes the top layer slightly imperfect.