articulated
octopus
flexi
glasseyes
- 8mm eyes 0.16mm layer, 3 walls, 8% infill
1-disc
PLA
Designer - 6mm eyes 0.16mm layer, 3 walls, 8% infill
1-disc
PLA
Designer
10
3
A huge shoutout to Dilem for making this work of art! I think the glass eyes just take it to the next level! :)
From the original maker: "In theory it should print without a brim but i didn't have the guts to try as every suction cup starts seperately so i didn't want to risk one of them coming loose and ruining the entire print.
Be careful, this is NOT an easy print, your printer needs to be leveled and calibrated correctly."
Well, I was brave with this one! I printed it without any brims. I had no issues, I think it's largely down to the excellent adhesion I get on my Cryogrip plate. I do however recommend a brim, I wasn't in the mood for cleaning it up afterwards, lol. No supports are required. I printed the 6mm version at 0.16 layer height.
Happy printing :)
Feeling generous enough to buy me a coffee? :) - https://buymeacoffee.com/B3ND
Affiliate links for glass eyes.
Aliexpress
https://s.click.aliexpress.com/e/_c3fHmdwH
Amazon
Filament used: Gradient macaron.
Cryogrip plate - https://s.click.aliexpress.com/e/_c4EitJ43
My printer: Elegoo Centauri Carbon
Affiliate link - https://amzn.to/4qfU9Xj
Originality of the Model
The author declares that this work is their personally remixed model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(4)
octopus 8mm glass eyes.stlDesigner
166.20 MB
2026-06-01
octopus 6mm glass eyes.stlDesigner166.20 MB
2026-06-01
- octopus 8mm glass eyes.3mfDesigner
31.64 MB
2026-06-01
- octopus 6mm glass eyes.3mfDesigner
46.38 MB
2026-06-01
View all(4)
