umber · lamp

modern minimalist table lamp, designed with a modular assembly approach for both style and functionality.

Assembly is simple and intuitive:

1. Thread the power cable through the lamp body, allowing the plug to exit from the bottom.
2. Secure the light socket fixture into the connector.
3. Twist-lock the connector into the lamp body for a snug fit.
4. Route the power cable through the channel
5. Finally, place the shade over the connector, where it rests securely within the top lip.

This modular design not only makes assembly effortless but also offers versatility and a clean aesthetic perfect for any modern interior. It includes two connector options, for either a 30mm or 40mm inner diameter

important

• filament should be dry and calibrated so that it deals appropriately with printing the patterns
• build plate must be properly clean so that there aren't adhesions issues and lifts during the print
• print profiles plates are separated by colour, and are available in the different options
• recommend adding a drop of glue to fix the hearts to the steam

components dimensions:

• lamp ~ x:161 · y:161 · z:156
• connectors ~ x:173 · y:173 · z:5
• shade ~ x:166 · y:166 · z:130

assembled dimensions ~  x:173 · y:173 · z:290

photos show printed in PLA and PETG

lamp settings

• PLA
• .40mm nozzle
• variable layer height
• 10% gyroid infill
• outer/inner wall

connector settings (2 inner diameter options)

• PETG
• .40mm nozzle
• variable layer height
• 10% gyroid infill
• outer/inner wall

shade settings

• PETG
• .40mm nozzle
• .28 layer height
• 0.56 line width
• spiral vase mode

notes

• commercial licence membership available on my patreon
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• includes 3mf files and STLs

follow me on instagram to stay updated on new releases • h3li0.design