canvas bracket
shroud
humidity display
3d printer accessory
cable outlet
printer shroud
PETG - 0,2mm layer, 6 walls, 20% infill
2-disc
PETG
Designer
PLA - 0,2mm layer, 6 walls, 20% infill2-disc
PLA
Designer
837
69
A shroud to replace the original PTFE plate.
I have designed a new canvas bracket that does NOT use the spacer.
4 different shrouds with and without rear cable and PTFE outlet and humidity display.
for the rear cable outlet there is a plate to print with an 11.5 mm cable plug you will need to parts to make the plug.
Originality of the Model
The author declares that this work is their personally remixed model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Models(10)
canvas holder.stpDesigner
50.86 KB
2026-07-06
shroud.stpDesigner186.44 KB
2026-07-06
shroud 2.stpDesigner182.77 KB
2026-07-06
shroud 3.stpDesigner168.85 KB
2026-07-06
shroud 4.stpDesigner172.59 KB
2026-07-06
shroud lip.stpDesigner103.68 KB
2026-07-06
11.5 hole bung.stpDesigner16.83 KB
2026-07-06
shroud plug.stpDesigner72.28 KB
2026-07-06
- Canvast Bracket With Shroud - PETG.3mf
861.29 KB
2026-07-14
- Canvast Bracket With Shroud - PLA.3mf
861.36 KB
2026-07-14
View all(10)
