This Demogorgon Book Nook is inspired by Stranger Things, with the creature emerging from the shadows between books, DVD's or game discs. The iconic open-petal head and tense posture gives your shelves some creepy vibes that will haunt your for sure... so... yeah, maybe not print this.

Designed as a decorative diorama, the piece balances high detail and simplified structure for easy printability and durability. Assembly is fairly easy, you will notice there is a groove on the bottom of the main frame, thats where you can pass a wire. Tape an LED strip inside the groove facing inside the model, you may need to use some scotch tape to secure the strip until you insert tthe decorative sleeve.

After that you need to solder and wire up the switch and usb c port. 

https://es.aliexpress.com/item/1005006186661399.html?

https://es.aliexpress.com/item/1005008871215158.html?

Glue the Subject inside the Frame and then insert clay, sand or anything heavy in the Rear weight (nothing conductive though, I am working on a shield for the switches). The two halves are assembled via magnets (6x2mm), if you do not have any there are pins provided, however be careful when inserting them. Support the back of the hole and push the pin in, if you are having trouble, insert the pin in hot water to soften it.

Any issues, comment or DM me