The charging station is designed to be compatible with the screwdriver's standard charging cable. The standalone version needs to be attached to something, otherwise it's too light!

Additional parts needed:

-2X Screw M3X200-30mmm

-1X Parcside charging kable.

Assembly:

1. Insert the charging cable into the upper part. (It should fit snugly. Adjust your print settings accordingly.)
2. Screw on the lower part, with the cable protruding through the small hole. (Any suitable screw should work, as it's only screwed into plastic.)
3. All screws must be flush! If a screw head protrudes beyond the intended hole, it won't work.

Additional notes:

• Make sure the screws are not too long so they don't damage the cable.
• You might want to use a stronger material for printing to increase stability.