Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Demobat Bust –  Stranger Things

This highly detailed bat creature bust, inspired by the dark universe of Stranger Things, is designed for FDM 3D printing with supports and captures the terrifying presence of the creatures lurking within the Upside Down. The model is presented as a dynamic bust mounted on a simple, stable base, making it an ideal display piece for horror and sci-fi fans.

The sculpt features exceptionally sharp details, including stretched, organic wing membranes, sinewy musculature, and a horrifying open mouth filled with sharp teeth. The aggressive pose and roaring expression give the impression that the creature is mid-attack, echoing the chaotic swarm scenes seen in the series.

Surface textures are rich and layered, emphasizing the unnatural anatomy of the bat — warped flesh, flowing membranes, and biomechanical-like forms that feel both alien and organic. The overall aesthetic strongly reflects the Upside Down atmosphere: dark, predatory, and hostile, as if the creature has just emerged from another dimension.

The model is optimized for FDM printing and requires supports, particularly for the wings, mouth interior, teeth, and thin membrane structures. This makes it a rewarding print for experienced makers and an excellent canvas for painting, weathering, and horror-themed finishes.

Perfect as a collectible bust, diorama element, or display model, this piece brings the raw terror of Stranger Things straight onto your shelf.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support