multicolor
Dolphin
Pixel Art
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
2
0
GBC - Animal Breeder 3 JPN - Dolphin 6, 2 filament changes
With 2 filament changes for a total of 3 different colors
This print must to be slice with "Initial Layer Height" and "Layer Height" = 0.20 mm (unless there is a change in scale)
Except change of scale and/or layer height before slicing.
You need to add 2 "filament change" (g-code "M600") or "pause" (g-code "M0", or "PAUSE") or ... depending on your printer/firmware to change filament.
A change of filament every two layers.
Start with : Light Blue filament until Z0.40
Switch to : Blue filament until Z0.80
Switch to : Black filament until Z1.20, the end of the print.
Filament used : PLA light blue Velleman, PLA Pantone "Tropical Turquoise" Anycubic, PLA+ Noir ArianePlast.
Credits :
- "Pixel Art Image" extracted from image found on "https://www.spriters-resource.com/game_boy_gbc/animbreed3/sheet/15374/"
Happy printing.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
- ES1329_CC2_PLA_0.20mm_GBC - Animal Breeder 3 JPN - Dolphin 6.3mfDesigner
51.81 KB
2026-04-10
