Vase SUSAN is an elegant round vase with fine ribs that subtly spiral around the vase. The spherical body and slender neck give this design a classic yet modern look.

Place this vase on your sideboard or coffee table where the spiral form comes into its own. The narrow opening is ideal for a few eucalyptus branches or dried oats. This vase can be printed as a normal vase or in vase mode for a quicker print. The vase in the photo is printed in vase mode.

Dimensions: D15.5 x H20 cm

Resizable: yes, in your slicer
3D Model Type: shelled body and solid body (vase mode)
Printing technique: FDM / FFF
File type: STL
Recommended materials: PLA, PETG, ABS, ASA
Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings

Normal mode
Nozzle diameter: 0.4mm, 0.6mm, or larger
Bottom layers: 6
Top layers: 4
Infill: 5%-10%
Perimeters: 2
Perimeter speed range: 25-45 mm/s
Layer height range: 0.25 mm-0.4 mm
Extrusion width / wall thickness range: default
Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

Vase mode

Nozzle diameter: 0.8mm or larger
Bottom layers: 6
Top layers: 0
Infill: 0
Perimeters: 1 (vase mode enabled)
Perimeter speed range: 25-45 mm/s
Layer height range: 0.25 mm-0.4 mm
Extrusion width / wall thickness range: default

License info: PERSONAL USE ONLY.

3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon.

Thank you for respecting the time and effort that goes into each creation.