holder
accessory
tpu
mount
spool
top
creality
auto
cfs
roller
k2
rewind
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
7
1
This allows to use the Auto Spool Rewind model. This only includes the remix holder for the above mentioned spool holder. You will still need to download and print out the parts for the Auto Rewind holder. You can review the assembly and demonstration of how it works here:
The auto rewind spool holder attempts to remedy this issue to not let the the filament droop down into the build area and/or get tangled around the print head. This also has a slipping clutch system so if the tension is constant as the filament is being fed the clutch will slip to reduce the tension on the spool.
Assembly:
For assembly of the auto rewind spool holder please review the original authors documentation and video in the provided links. In my case I printed the following files:
SpringFlat_Soft_v3.3.STL
Clutch_v3.3.STL
Dial_v3.3.STL
Axle_v3.3.STL
Clip_v3.3.STL
Hub_v3.3.STL
NutCurved_v3.3.STL - 2x
All Credits go to the original author VincentGroenhuis linked for the design.
https://www.thingiverse.com/thing:3338467
Originality of the Model
The author declares that this work is their personally remixed model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(3)
auto-rewind-axle-holderstl.stlDesigner
150.86 KB
2026-03-09
- k2-auto-rewind-axle-holder-addon elegoo.3mfDesigner
540.65 KB
2026-03-09
new-holder-v12stl.stlDesigner3.38 MB
2026-03-09
View all(3)
