In an alternate timeline where the battle with the androids left Goku fatally wounded, Bulma and Capsule Corp developed a revolutionary stasis chamber to reverse age and  preserve his body while cybernetic enhancements were installed to save his life. 

Suspended by support filaments in a healing stasis, this version of Goku, now part Saiyan, part machine, waits for full system integration before reawakening.

This 3D-printed string art piece captures that pivotal moment: Goku frozen in time, surrounded by intricate cybernetic implants and ornate Saiyan designs. The DNA-like side columns symbolize the merging of biology and machine. A powerful, lore-respecting tribute to a “what if” world where science saved the last hope of Earth. Not only a decorative piece, with 2 pucks you can turn this into an eye catching lamp!

SPECIAL NOTE!!!!! 

Try not to use the Super Tack plate, taking the print off may damage the strings. When you finish priting, LET IT COOL! If you try to pull it off while it is hot, the strings will bend.

Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks.  But, you also need to have proper adhesion, clean your plate and watch the print so you get the best results possible.

To light it you will need the standard 3AAA RGBW pucks OR cabinet light from aliexpress:

https://es.aliexpress.com/item/1005008329467821.htmlhttps://es.aliexpress.com/item/1005004276111433.html

Have in mind, you need to print two puck holders, or 1 lamp holder and end cap.

Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings that will fit exactly to the two halves, just make sure you put a paper down so the glue doesn't leak and ruin your table (ask me how I know). There are nubs in the provided bases and it will keep it in place for a desktop stand, but carrying it around without gluing it, is not advised… if you are happy with it and do not wish to reuse the base for my other models, go ahead and glue it.

Also, DO NOT change layer size because then the mid air strings may fail.  Any issues, let me know.