Wall hanger for 5 blister HotWheels packs (or for any other blister with 11cm width) + hooks.

Printed from cool white PLA, with auto-generated support inside overhangs. The support is easily removable with a knife (be careful).

I also recommend using an outer brim or mouse ears for better adhesion to avoid warping of the corners.

Hanger cam be mounted directly to the wall with 2 screws (⌀3mm) or using a flat bar, like in the photos.

Added two types of hooks - if you want to stack/couple the hangers – see the main photo.
I mounted it on a 2 mm thick aluminum bar. The aluminum bar is offset 3 mm from the wall with spacers. Hopefully everything is clear from the photos :)

For blister with 11cm width.