A Like, Rating or Comment is a huge help and I really appreciate all of it. 🙏

Want to support my work? 
You can buy me a coffee and support my work here: https://ko-fi.com/mikegyverminis

Commercial Licensing is also available here as well to sell all of my models
 

Looking for More DnD Minis?

Check out the whole collection with new ones added all the time.

==========================================================

DnD TTRPG Zombie Crocodile Miniature

Emerging from the stagnant swamp, the zombie crocodile is a terrifying sight, its immense, rotting jaws still capable of snapping shut with unnatural, undead speed. This massive, putrid reptile drags its decaying body across the muck, an unholy ambush predator driven by a relentless, infectious hunger.

Nozzle: 0.4

Layer Height: 0.08mm

**This print has been tested multiple times on an X1C and P2S successfully, results may vary if printed on a different printer (bedslinger or another CoreXY)**

Post Processing: Use thin tweezers to Pull supports down and out after cutting from the brim/base first. Be careful around the claws,  as they're thinner. These just need extra care and patience.  Some smoothing (sanding etc) after the supports are removed, may be required. 

Assembly: This model comes in 2 Parts that need to be glued together. Glue Part A and both Parts of B with glue like Crazy Glue. 

After gluing may require some miniature filler prior to painting.

Housekeeping: Make sure your printer is Calibrated, Build Plate washed and Filament Dried so the supports have the best adhesion possible. Let the miniature fully cool down before removing supports.