A Like, Rating or Comment is a huge help and I really appreciate all of it. 🙏

Want to support my work? 
You can buy me a coffee and support my work here: https://ko-fi.com/mikegyverminis

Commercial Licensing is also available here as well to sell all of my models
 

Looking for More DnD Minis?

Check out the whole collection with new ones added all the time.

==========================================================

DnD TTRPG Dire Wolf Miniature

Raising its massive, shaggy head to the moon, the dire wolf lets loose a chilling, mournful howl that echoes through the frozen wilderness, a terrifying declaration of its predatory dominance. This colossal canine, larger and more savage than any mundane wolf, is a deadly force of nature that hunts in the darkest reaches of the forest.

Nozzle: 0.4

Layer Height: 0.08mm

**This print has been tested multiple times on an X1C and P2S successfully, results may vary if printed on a different printer (bedslinger or another CoreXY)**

Post Processing: Use thin tweezers to Pull supports down.  Some smoothing (sanding etc) after the supports are removed, may be required. 

Assembly: This model comes in 2 Parts. Glue Part A and both Parts of B with glue like Crazy Glue. 

After gluing may require some miniature filler prior to painting.

Housekeeping: Make sure your printer is Calibrated, Build Plate washed and Filament Dried so the supports have the best adhesion possible. Let the miniature fully cool down before removing supports.