Unboxing the Four-Piece Stress-Relief Cookie Set

This delightful stress-relief toy set includes four adorable cookies: a square cookie, a cat‑patterned cookie, a bear cookie, and a plain sandwich cookie.

1. The pressing function requires a keyboard axis.
2. The plain, unpatterned cookie is available in both pressed‑and‑rotated versions. If the rotating version feels particularly tight, gently bend the rotating ring slightly or let it sit for 1–2 days—this will reduce the friction and make rotation smoother.

Installation Tips

1. For attaching the back clip: Start by pressing one side into place, then press the other side until it’s fully seated.
2. Each cookie features a lanyard hole and a back clip; if you don’t plan to use the back clip, we recommend leaving it uninstalled for now, as the back clip can be quite difficult to remove once installed.
3. Although the design incorporates precise fit tolerances, we still strongly suggest using adhesive, especially if you intend to carry the cookies with the back clip attached. For added security, we highly recommend securing the back clip with glue before use to prevent accidental loss when out and about.

Printing Guidelines

• Before printing, avoid rotating the model. Testing has shown that printing the model from different angles can alter the dimensions of the back‑clip holes and keyboard‑axis holes, potentially causing the back clip or keyboard axis to fail to install properly. While this issue might also stem from my printer’s precision, to be on the safe side, we advise against rotating the model altogether.

Installation Videos: 01. Square Cookie      02. Cat‑Patterned Cookie      03. Bear Cookie

Commercial License

• A Commercial License is available through my Patreon: Voxo3D
• $5 to become an early‑bird member and gain access to All My Designs (50+):  voxo3d.com
• We release 4+ new models every month—though in most cases, the actual number is higher.