🐟 Whisper of the Pond – Enchanted Koi 3D Bookmark

A flowing design inspired by the tranquility of koi ponds and the magic of nature. Whisper of the Pond brings vivid colors and elegant motion to your reading ritual, with swirling waters, bright koi, and blooming flowers brought to life in stunning detail.

📐 Model Details

• Size: 42 × 145 mm
• Infill: 100%
• Layer Height: 0.08 mm (base 0.16 mm)
• Base Thickness: 0.48 mm
• Max Thickness: 2.56 mm
• Actual Thickness: 2.56 mm

🎨 Filaments Used (7 colors)

• Black – PLA Sunlu Black (TD: 0.1)
• Blue Gray – PLA Bambu Basic Blue Gray (TD: 2.5)
• Mistletoe Green – PLA Bambu Basic Mistletoe Green (TD: 0.7)
• Magenta – PLA DO3D Magenta (TD: 5.5)
• Scarlet Red – PLA Bambu Matte Scarlet Red (TD: 1.7)
• Yellow – PLA Sunlu Yellow (TD: 6.0)
• White – PLA Bambu Jade White (TD: 5.7)

⏸️ Swap Instructions (Manual or AMS)

1. Start with Black
2. At layer #8 (0.72 mm) → swap to Blue Gray
3. At layer #12 (1.04 mm) → swap to Mistletoe Green
4. At layer #17 (1.44 mm) → swap to Magenta
5. At layer #21 (1.76 mm) → swap to Scarlet Red
6. At layer #25 (2.08 mm) → swap to Yellow
7. At layer #30 (2.48 mm) → swap to White (rest of print)

✔️ For single-extruder printers, use pause points at the above layers.

🧾 Notes

• Do not change the 0.08 mm layer height to keep swaps accurate.
• No supports required.
• The design glows best with bold matte + bright filament combos.