This is a 3D-printed mug shaped like the Pokémon Charmander. It's hand-painted with an orange body, a light-colored belly, and blue-green eyes. The mug's handle is the Pokémon's tail, which has a small, hand-painted flame on the end.

Print Settings

• Printer Type: Fused Deposition Modeling (FDM)
• Filament Material: PLA (Polylactic Acid)
• Color: Orange (Pantone 1505 C) for the body, Cream/Ivory for the belly/claws, and Red/Yellow for the tail flame.
• Nozzle Diameter: 0.4mm
• Layer Height: 0.2mm
• Infill Density: 20% (Grid or Gyroid pattern recommended for strength)
• Print Speed: 50 mm/s (First layer 20 mm/s)
• Supports: Required. Use tree supports for the tail, handle, and chin area.
• Build Plate Adhesion: Skirt or Brim recommended to ensure stability.
• Raft: Not required.

Post-Processing Details

• Supports Removal: Carefully remove all supports using flush cutters or pliers.
• Sanding: Lightly sand the entire model with fine-grit sandpaper (220 grit or higher) to smooth out layer lines, especially on visible surfaces.
• Primer: Apply a thin layer of plastic primer to ensure paint adhesion.
• Painting:
  • Use acrylic or model paints.
  • Paint the main body a vivid orange.
  • Paint the belly and the tips of the claws a creamy off-white color.
  • The eyes should be painted with a base coat of white, then a deep teal or blue-green for the iris, and a black pupil. Finish with a clear gloss for a reflective effect.
  • Paint the tail flame with a gradient from red at the base to yellow at the tip.
• Sealant/Finishing: Apply a clear, food-safe sealant or varnish to protect the paint and make the mug safe for use. A matte or satin finish is recommended for a more authentic, toy-like look.