This is a detailed 3D-printed chalice featuring a stylized skull as the main cup component. The skull is adorned with an elaborate crown or band, and the piece is supported by a decorative, fluted stem and base. The design combines gothic and ornate elements, making it a compelling decorative object.

3D Printing Specifications

Estimated Dimensions:

• Height: ~180 mm (7.1 inches)
• Width (at the crown): ~120 mm (4.7 inches)
• Depth (from front to back): ~140 mm (5.5 inches)
• Weight: Approximately 100-150 grams of filament, depending on infill settings.

Recommended Print Settings:

• Printer Type: Fused Deposition Modeling (FDM)
• Filament: PLA (Polylactic Acid) is highly recommended for its ease of printing and detail reproduction. White or bone-colored filament would match the aesthetic in the image.
• Layer Height: 0.16 mm - 0.2 mm. A smaller layer height will produce finer details but increase the print time.
• Infill: 15% - 20%. For a decorative piece, a lower infill percentage is sufficient for structural integrity and will save filament and printing time. A cubic, grid, or gyroid infill pattern is ideal.
• Supports: Essential. This model has significant overhangs, particularly under the chin, jaw, and the details of the crown. Tree supports are often efficient for this type of organic shape, but standard supports with a good interface can also be used.
• Brim/Raft: A brim is highly recommended to improve bed adhesion, especially for the relatively small surface area of the base.
• Print Speed: 50-60 mm/s. Consider reducing the speed for the outer walls (e.g., 25-30 mm/s) to achieve a smoother surface finish.
• Nozzle Temperature: Follow the filament manufacturer's recommendation, typically 200-210°C for PLA.
• Bed Temperature: 60°C for PLA.
• Post-processing: Some minor cleanup of support artifacts may be required with snips or a hobby knife. Light sanding can be done to further smooth the surface.