Tire
Flower Pot
Water reservoir
- 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer
6
6
- Filament: PLA
- Layer height: 0.2 mm
- Wall thickness: 2 walls
- Infill density: 15%
- Nozzle temperature: 220°C
- Bed temperature: 50°C
- Print speed: 300 mm/s
Based on the specific characteristics of the model, I adjusted certain print settings while keeping the strength-related parameters at their default values.
Note: If you encounter any issues that you can’t resolve or have other questions, feel free to send me a private message—I typically check my inbox several times a day.
Happy printing!
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(4)
- 轮胎花盆.3mfDesigner
2.76 MB
2025-08-20
滤网.STL.stlDesigner166.29 KB
2025-08-20
盆底.STL.stlDesigner4.94 MB
2025-08-20
盆身.STL.stlDesigner4.83 MB
2025-08-20
View all(4)
