Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 155.84x220mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.5

PLA+ Sunlu Orange Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Orange

At layer #19 (1.6mm) swap to White for the rest.

You can find the details in the documentation.

If you don't have a multicolor printer, you can find a guide to color printing using manual filament change in the PDF file.

If you like my uploaded model, please take a look at my other works!