A model of Elegoo's Saturn series of MSLA resin based 3D printers. It can be printed in multicolor, and has alternate lid options for both the Saturn 4 and its Ultra counterpart, and the flagship Saturn 4 Ultra 16K printer that was released not too long ago. I printed it in grey and black ABS and green PLA, though if you want to print the Ultra and 16K, all you have to do is make all of the green on the lid to black, and change the lid and body's black accents to white.

THE VERSION IN THE PICTURES AND PRINT PROFILE IS SCALED UP 800%!

Because of its size and the fact that ABS doesn't cool very well, you may see some defects in the back if you print it with the orientation that I did. To help with this, I have also uploaded an optional back piece that is printed separately (It is called Saturn 4 Ultra 16K Back Cover). 

It is also worth noting that the fact that it is multicolor extents the time drastically; the main body alone takes about 32 hours to print on relatively speedy settings.

I would recommend adding some custom supports to the model if you use the print profile, primarily behind the resin vat and build plate; after I printed it I realized I had set there to be no supports directly on the model, so they are missing in those spots. The defects are obscure, however, and can be minimized further with some post-processing.

The provided print profile is for the Kobra S1. Feel free to upload your own if you find better settings!