🦁 Solar Roar – The Lion of Light

Regal. Radiant. Ready to Rule Your Page.

This HueForge-powered bookmark captures the majesty of a lion rising through swirling embers into a blazing sun. With richly layered tones of black, orange, gold, and ivory white, Solar Roar brings strength and elegance to every chapter. The design balances fine detail with bold silhouette — made for those who read with courage.

⚠️ Print Warning & Tips for Best Results

This design features high-contrast HueForge depth layering and relies on exact pause point placement for filament swaps.

🛠️ Recommended Settings:

• Layer Height: 0.08 mm
• Base Layer: 0.16 mm
• Infill: 100% (for full depth color transitions)
• Supports: None
• Brim: Optional, but a 5 mm brim is recommended for adhesion
• Walls: 3

💡 Tips:

• Pause points are layer-specific — make sure to slice at 0.08 mm
• Use a textured or matte bed for clean detail on the first layer
• No purge tower? Use a purge line and swap manually before resuming

📏 Model Dimensions:

• Size: 41.99 mm × 145 mm
• Actual Depth: 2.7 mm
• HueForge Max Depth: 2.6 mm
• Minimum Printable Detail Depth: 0.48 mm
• Orientation: Flat (Do not rotate)

🎨 Filaments & Transmission Distances (TD):

• Black – BambuLab Tough Black (TD: 0.6)
• Orange – BambuLab Basic Orange (TD: 4.2)
• Gold – BambuLab Basic Gold (TD: 2.6)
• Ivory White – BambuLab Jade White (TD: 4)

⏸️ Manual Color Change Instructions – No AMS Required

Print this on any single-extruder printer using pause and swap.

• 🖤 Start with Black
• 🔁 Swap to Orange at Layer #12 (1.04 mm)
• 🔁 Swap to Gold at Layer #18 (1.52 mm)
• 🔁 Swap to Ivory White at Layer #27 (2.24 mm)

✅ Slicing at 0.08 mm is essential for accurate layer match
✅ Always purge before resuming to prevent color bleed

🧵 Additional Notes:

• Designed with HueForge for clean vertical layering and smooth tonal shifts
• Bookmark is fully flat and prints in one piece
• Fits perfectly in the HueForge Bookmark Stand for display
• Tested on Bambu Lab A1 Mini, P1P, and P1S — performs flawlessly

🎨 Styling Ideas:

• Use a gold silk filament for enhanced shine
• Pair with other celestial or animal bookmarks for a themed set
• Frame as a mini art piece or gift to your favorite book-loving Leo ♌

☕ Want to support more fierce & fiery designs?
Buy Me a Coffee
🔓 Commercial use available via:
Patreon.com/Lilith3DPrint
📎 Display it proudly with the HueForge Bookmark Stand

Thanks for roaring through the full post — you’re a legend 🦁🔥
Boosts and shares help creators like me keep crafting through the night!