No AMS/MMU needes, I printed mine with some manual colorswaps on a CC1
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 1.76mm

    #000000 PLA+ Elegoo Black  Transmission Distance: 0.8
    #00328f PLA+ Elegoo Dark Blue  Transmission Distance: 3.5
    #ffffff PLA+ Anycubic White  Transmission Distance: 4.4
    #ea140e PLA Elegoo Red  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Dark Blue
    At layer #10 (0.88mm) swap to White
    At layer #12 (1.04mm) swap to Red
    At layer #18 (1.52mm) swap to White

Border color:
    At layer #22 (1.84mm) swap to Black for the rest.