No AMS/MMU needes, I printed mine with just 4 manual colorswaps on a CC1

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.24mm

The Max allowed Thickness is 2mm and the Actual Thickness is 1.6mm

#00328f PLA+ Elegoo Dark Blue Transmission Distance: 3.5

#f64e00 PLA+ Elegoo Orange Transmission Distance: 4

#ffffff PLA+ Anycubic White Transmission Distance: 4.4

#000000 PLA+ Elegoo Black Transmission Distance: 0.8

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #5 (0.48mm) swap to Dark Blue

At layer #6 (0.56mm) swap to Orange

At layer #11 (0.96mm) swap to White

Border Only Colors from here until the end.

At layer #21 (1.76mm) swap to Black for the rest.