Summary

A little toy, to demonstrate a planetary gear. Made it just to enjoy constructing with OpenSCAD.

Click -> Short Video

Instructions

Print p2_mGearShaft 6 times and everything else once. Assemble it without any glue. The crank handle consists of two pieces, printed in one step. You may use a little force to separate them.

I printed mine on a UM2:
Layer height: 0.1
Shell thickness: 0.8
Bottom/Top thickness 0.6
Fill Density: 30 (crank and crank handle: 100)

I recommend to print the crank and two crank handles in one step.

Originality of the Model

The author declares that this work is their personally shared model

Original creator:

ds2015

Reprint source:https://www.thingiverse.com/thing:960410

This model is licensed under the following terms:

Creative Commons Attribution - ShareAlike

Credit must be given to the creator

Remixes must be shared under the same license

Models(8)

pv2_crank.stlDesigner
107.03 KB
2025-04-19
pv2_innerGear.stlDesigner
219.27 KB
2025-04-19
pv2_mGearShaft.stlDesigner
137.79 KB
2025-04-19
pv2_crank_handle.stlDesigner
189.48 KB
2025-04-19
pv2_middleGears.stlDesigner
746.30 KB
2025-04-19
pv2_outerGear.stlDesigner
500.89 KB
2025-04-19
pv2_cage1.stlDesigner
1.27 MB
2025-04-19
pv2_cage2.stlDesigner
1.24 MB
2025-04-19
View all(8)

No more