80
13
this model is 20cm tall and was printed in FDM. The various components fit together well if it is printed with a good resolution. Personally I have used PLA PLUS of various colors and I found them very good. Toothpicks work perfectly for leg and arm pins.
Materials: PLA PLUS 1.75 mm ( Red, Blue, Black, Purple, Green, Yellow and Silver)
For some parts I used acrylic colors
Plastic glue
Originality of the Model
The author declares that this work is their personally shared model
This model is licensed under the following terms:
No Copyright.
Models(28)
alabarda.stl
1.78 MB
2025-06-13
- body_1_1.stl
736.80 KB
2025-06-13
- body_1_2.stl
3.99 MB
2025-06-13
- body_2.stl
2.50 MB
2025-06-13
- body_3.stl
15.84 MB
2025-06-13
- body_4.stl
7.58 MB
2025-06-13
- body_5_1.stl
7.68 MB
2025-06-13
- body_5_2.stl
2.63 MB
2025-06-13
- braccio_1.stl
621.90 KB
2025-06-13
- braccio_2.stl
650.78 KB
2025-06-13
- corno.stl
3.93 MB
2025-06-13
- coscia_dx.stl
132.50 KB
2025-06-13
- coscia_sx.stl
132.50 KB
2025-06-13
- giunto_coscia.stl
2.21 MB
2025-06-13
- L_piede_1.stl
43.55 KB
2025-06-13
- L_stinco.stl
7.35 KB
2025-06-13
- L_piede_2.stl
7.36 KB
2025-06-13
- giunto_piede.stl
2.22 MB
2025-06-13
- maglio.stl
751.51 KB
2025-06-13
- mano_dx.stl
16.77 MB
2025-06-13
- mano_sx.stl
16.63 MB
2025-06-13
- piede_1.stl
2.19 MB
2025-06-13
- piede_2.stl
2.10 MB
2025-06-13
- spalla.stl
2.60 MB
2025-06-13
- stinco.stl
864.41 KB
2025-06-13
- testa_1.stl
12.43 MB
2025-06-13
- testa_2.stl
1.44 MB
2025-06-13
- V.stl
168.34 KB
2025-06-13
View all(28)
