Flexible & Breathable lining for costumes and fursuits!

Print settings:

• Walls 0
• Top/Bottom layers 0
• Infill gyroid (or any other TMPS) 15%

Compatible with all my bases (unless said so). You can find more of my bases on my Etsy as I only upload for free the older designs.

The lining connects to a base via a flat surface at the front. If you want to adapt your base to it I recommend you to line it up and a bit into the upmost part o fyour base and apply a boolean cut to the base in any 3D modeling software, this will ensure the base aligns smoothly with the lining. If you want to adapt a base and don't know how you can also dm me (I am more active on email/instagram/etsy) For most bases I will help you with this for free.

To connect it to a base you only need to glue the upper part as the left and right must be able to move freely. To keep the base from moving, if your jaw can't hold it in place, add aditional clipt to the left and right.

I don't recommend printing on a small printer, you will need a 250mm^2 build size or bigger depending on your head. I don't recommend for you too print it in multiple parts.