Stackable Twist-Lock Containers – Part 2!

I had a lot of questions about different sizes or more dividers inside the containers. Finally there was a time to sit back to this design and extend the range of available parts. I made additional 35 of them so decided to split in two new uploads. Expect Part 3 soon!

So what do you get in Part 2?

More dividers in both bottom and upper parts of 20, 30 and 40mm height containers. Now all of them are in versions with 2, 3, 4 and no dividers inside.

Now you can keep same radius screws in different length or set of screws, nuts and washers in a singe container. Beads in same size and different color, pills and other small items :)

Stackable Twist Lock Containers

Practical storage solution for your household or workshop.

Store your screws, nuts, washers, bearings, electronic components, magnets, switches or connectors. Any small and loose items you like!Originally designed to use in the workshop during power tools reparation process to keep screws and small parts organized. Sometimes it takes days or weeks to get replacement parts and in the meantime you may forget what kind of screw goes where when you keep everything together. This simple storage containers solve this problem.

Housing screws – first container. Two lengths? Split version. Add another container, put electronics screws and parts. Another one - gear housing screws. Etc, etc. When you finished just add the lid. Put container with the rest of the parts so no screw will be missing. Time to put your tool back together? Just use screws in reverse order :)

This container may also help during initial part segregation when building RC models or any DIY project with lots of small parts.

About the model:

Container diameter – 73mm outside, 70mm inside. Storage height 20, 30 and 40mm.

Fast print – around 1 hour each container.

Low filament use – 18-30g each part.

Mix with the containers available in previous design :)

Print it in standard PLA or PETG - do not use silk PLA as it may slightly change model dimensions and make this containers to not fit together.

If you like the model and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Also check my other models, maybe you will find something interesting :) Thank you!

Happy printing! :)