I brought healer this time Mr. Rogue, how about that?!? And not some random healer, geared one!

Lok’amir il Romathis and Red Dragonscale Protector for Dummy 13!

Another two iconic drops from classic BWL 40-man raid. This time I wanted a combination of weapon with shield and this choice was very easy for me.

I hope you will enjoy it :)

Check my other models for World of Warcraft themed Dummy 13 weapons – The Untamed Blade, Twinblade of the Hakkari, Bloodlord’s Protector, Zin’rokh, Thunderfury, Shalamayne or Blinkstrike! Also Horde and Alliance Battleground banners, both Classic and Retail versions and Treasure Chest / Bountiful Delve Epic Chest :) 

How to print this models

Please clean your printplate before the print. There are few parts with small build plate contact so it has to be clean. You may also use glue.

This models were designed with 0.4mm nozzle in mind, don’t try any bigger. Standard 0.2mm layer height is fine.

There are two print profiles for the weapon. Fast single color print and something for really dedicated fans – multicolor version. First one takes only around 3g of filament and 30 min print but the second one… the second one is another story ;) This is long print with a lot of waste.

Depending on your printer accuracy there are two pommels to choose from. Tight fit and loose fit. Choose the one that works best for you.

Assembly

After printing, models require little bit of assembly.

Lok’amir – remove brim from pin and pommel. Insert pin into crystal/head of the weapon and then check the connection between the head and the grip. If it is loose then glue these two parts together using pin as a guidance. Slide the weapon trough Dummy hand and add the pommel.

Red Dragon Protector – glue the handle to the shield main body and then slide it trough Dummy 13 hand.

If you like the model and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Thank you!

World of Warcraft, Lok’amir il Romathis, Red Dragonscale Protector and all trademarks belongs to Blizzard. I’m just a fan who recreated this model for 3D printing to share with others for free. No commercial use.

Happy printing! :)