box
lid
supportless
assembly
money
cube
parts
moneybox
pig
coins
boar
piggy
piggybank
savings
wildboar
54
6
Piggy and Boar cubes for your savings
100x100x109mm
For single-color printers
No supports needed
No glue needed for assembly
Eyes and a smile will snap together with base model
Original models are with a lid (printed separately) but there is a version without it too (you will need to break a piggybank to get the money then)
If you don't have a good cooling on your printer you can print a base and a face separately - use PARTS files then
Face should snap in to base model but those models were not print tested. In the worst case you will need to use a glue
Printing tips
Made for 0.4mm nozzle
You may need some infill - 10-15% should be fine then
Printed with 2 walls and 0.2mm layer height
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(13)
PiggyBANK.stlDesigner
1.19 MB
2026-01-20
PiggyBANK_Eye-inner_black_x2.stlDesigner49.69 KB
2026-01-20
PiggyBANK_Eye-outer_white_x2.stlDesigner118.64 KB
2026-01-20
PiggyBANK_Lid.stlDesigner33.68 KB
2026-01-20
PiggyBANK_PARTS-Base.stlDesigner667.95 KB
2026-01-20
PiggyBANK_PARTS-Base-closed.stlDesigner671.76 KB
2026-01-20
PiggyBANK_PARTS-face.stlDesigner714.14 KB
2026-01-20
PiggyBANK_Smile.stlDesigner42.27 KB
2026-01-20
PiggyBANK-BOAR.stlDesigner1.27 MB
2026-01-20
PiggyBANK-BOAR_Fangs.stlDesigner224.59 KB
2026-01-20
PiggyBANK-BOAR_PARTS-face.stlDesigner795.79 KB
2026-01-20
PiggyBANK-BOAR-closed.stlDesigner1.28 MB
2026-01-20
PiggyBANK-closed.stlDesigner1.20 MB
2026-01-20
View all(13)
