Phyrexia Swamp Mana Poster Hueforge from Magic The Gathering

Project: deathphyrexia.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 187.74x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.99998mm

    #000000 PETG BambuLab HF Black  Transmission Distance: 0.8
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #aa55ff PETG overture purple  Transmission Distance: 4
    #ffffff PETG Sunlu White  Transmission Distance: 5
This print uses 4 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to purple
    At layer #16 (1.36mm) swap to White for the rest.
 

Note: In my print file, for ease of setup, I have the blue gray as a dark blue in the filament list. It's blue gray.