This Pocket Mini Ratchet for 1/4" bits is a fully functional ratcheting tool designed to tighten AND loosen screws, not just hold bits.

It features a true ratcheting mechanism, allowing:

• ✔️ Tightening

• ✔️ Loosening

• ✔️ One-hand operation in tight spaces

⚠️ IMPORTANT – PRINT AS PROVIDED

 This model MUST be printed exactly as supplied.

 ❌ Do NOT modify print settings (infill, walls, layer height, flow, etc.).

 Any change may compromise the ratcheting action, strength, or anti-break behavior.

Once printed, the tool is ready to use immediately, with no post-processing or assembly required.

An optional internal magnet can be added to securely retain the bit.

🔄 RATCHETING FUNCTION

• True ratchet action

• Designed for both tightening and loosening

• Optimized geometry for smooth engagement

• Works reliably even in very compact spaces

🧲 OPTIONAL MAGNET INSTALLATION

1. Let the magnet attach directly to the bit

2. Use the bit to position the magnet correctly

3. Glue the magnet to the bit

4. Apply a small amount of glue on the magnet

5. Insert the bit into the mini ratchet

6. Allow the glue to fully cure

Once cured, the magnet stays permanently inside the tool.

💪 KEY FEATURES

• ✅ Tightens AND loosens screws

• ✅ Pocket-size / EDC friendly

• ✅ High torsional strength

• ✅ Smart anti-break safety system

• ✅ Bit slips instead of breaking the print under excessive torque

• ✅ No supports, no assembly, no tuning

• ✅ Designed for real-world use

The anti-break system is designed to help protect the printed part by allowing controlled bit slippage when excessive force is applied.