all the best, happy, Pepsi for short!

On the basis of Pepsi, double-edged telescopic sword is added to increase playability,

playability high compatibility moral good, gifts to share!

installation steps:

1. Install the mark on the bottle with glue;

2. Install the buckle on the lower bottle with glue. The surface of the buckle shall be flush with the surface of the bottle body as far as possible, as indicated by the red arrow in the following figure. Otherwise, when the upper and lower bottles fit together, the gap may be too large;

3. Put the blade into the upper and lower bottles respectively and tighten the lid:

4. The upper and lower bottle bodies are rotated and spliced together through buckles and grooves;

Notes:

① The support of the cover is a bit too much, it is recommended to cooperate with pointed-nose pliers to remove, otherwise it is a bit difficult to remove;